Souris Q171
Souris Q171
Part Number:souris-q171/sys SKU Number:8667
Can't find what your looking for? Need a custom solution?
Click Here »
Can't find what your looking for? Need a custom solution?
Reviews
0
Click any image to see a larger version.
Souris Q171
Highlighted Items are Optional
System Features
» 1U rackmount chassis with a depth of 27.75" (705mm)
»

Four Dual-Core / Quad-Core AMD Opteron 8000 Series processors with 1000MHz HyperTransport

» Up to 128GB of DDR2 SDRAM 667/533/400MHz dual channel ECC registered memory
» nVidia MCP55 Pro chipset
» Up to 3x 3.5" Hot-Swap SATA II Drives with RAID Support
» Intel® 82546GB Dual Port Gigabit Ethernet Controller
» Non-redundant 1000W AC-DC high-efficiency power supply w/ PFC + PDB
» 1x PCI Express x16 expansion slot via riser card
Souris Q171

Processor & Chipset
CPU Socket Quad 1207-pin Socket F
System Bus 1000MHz HyperTransport
Processor Dual-Core / Quad-Core AMD Opteron 8000 Series
Number of processors (std/max) 1/1
Processor Cooling Passive Heatsink
Chipset
nVidia MCP55 Pro
NEC uPD720400
Memory
Memory Capacity
Up to 128GB of DDR2 SDRAM 667/533/400 MHz ECC registered memory

Dual channel memory bus

Memory Sockets 32x 240-pin DIMM sockets
DIMM Sizes 256MB, 512MB, 1GB, 2GB, 4GB
Memory Voltage 1.8V only
Memory Voltage
Corrects single-bit errors
Detects double-bit errors (using ECC memory
Standard / Integrated Devices
SATA
nVidia MCP55 Pro SATA2 3.0Gbps Controller
6 SATA Ports
nVidia RAID 2.0
SATA RAID 0, 1, 0+1, 5 JBOD Support
IDE
Single EIDE channel support up to two UDMA IDE devices
Supports UDMA Mode 5
Supports PIO Mode 4
Supports ATA 100 / 133
Network Controllers
Intel® 82546GB Dual Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
IPMI
Support for Intelligent Platform Management Interface v.2.0
200-pin IPMI slot
Optional: AOC-SIMLC(+) R 3.00
Optional: AOC-SIM1U(+) R 3.00
RMM (Remote Management Module) (Card not included)
Note: Dedicated LAN connection is required for KVM-over-LAN function.
Graphics
ATI ES1000 Graphics Controller

DB-15 connector for VGA display

Super I/O Winbond 83627HG
BIOS
8MB Flash EEPROM with AMI® BIOS
SST 49LF080A BIOS Chip
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
I/O Ports
Rear Panel I/O Ports
2x USB 2.0 Ports
1x PS/2 keyboard port
1x PS/2 mouse port
2x RJ-45 LAN ports
1x DB-15 VGA port
1x DB-9 Fast UART 16550 serial port
Internal I/O
6x SATAII onboard ports
1x Floppy port
2x Internal USB 2.0 headers
1x Fast UART 16550 serial header
1x IDE port
Management and Health Monitoring
Software Support for Intelligent Platform Management Interface v.2.0
CPU
Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
CPU 4-Phase-switching voltage regulator
FAN
Total up to 9-fan status tachometer monitoring
Up to nine 3-pin fan headers
Status monitor for speed control
Support 3-pin fans with fan-speed control
Temperature
Monitoring for CPU and chassis environment

CPU thermal trip support

PC Temperature Sensing Logic
LED
CPU / Overheat LED
Suspend-state indicator LED

+5V Standby Alert LED

Other Features
Chassis intrusion detection

Chassis intrusion header

Expansion Slots
Supported Bus Interfaces 1x PCI Express x16 slot
Expansion Slots
1x low-profile expansion slot
Storage and Media
Number of hard drives supported 3x 3.5" Hot-swap SATA Drive Bays
Interface type supported SATA
Storage Controllers Onboard nVidia MCP55 Pro SATA2 3.0Gbps Controller
Drive Bays
  • 1x Slim type bay for CD-ROM, CD-RW/DVD combo drive, or DVD±RW
  • 1x slim bay for floppy drive
  • RAID capabilities SATA RAID 0, 1, 0+1, 5, JBOD Support
    Chassis and Power Supply
    Form Factor Rack
    Rack Height 1U
    System Cooling
    Middle 6x heavy-duty counter-rotating fans with optimal fan speed control
    Chassis Dimensions
    Height 1.7" (43mm)
    Width 17.2" (437mm)
    Depth 27.75" (705mm
    Gross Weight ≈ 49 lbs (depends on configuration)
    Power Supply
    Non-redundant 1000W AC-DC high-efficiency power supply w/ PFC + PDB
    AC Voltage   100 - 240V, 50 - 60Hz, 15 - 7Amp
    +5V   20 Amp
    +5V standby   4 Amp
    +12V   83 Amp
    -12V   0.6 Amp
    +3.3V   20 Amp
    Environment
    Operating Temperature 10 - 35°C (50° - 95°F)
    Non-Operating Temperature -40 - 70°C (-40° - 158°F)
    Humidity 8 - 90% non-condensing
    Non-Operating Humidity 5 - 95% non-condensing