Souris N333
Souris N333
Part Number:souris-n333/sys SKU Number:8283
Reviews
0
Click any image to see a larger version.
Souris N333
Highlighted Items are Optional
System Features
The Souris N333 is a 1U twin system designed to increase computing density while reducing cost, energy and space requirements. With two systems (or two nodes) within a 1U space, the Souris N333 can support up to 16 processor cores - two systems each housing two quad-core AMD Opteron Processor 2000 Series.

» 1U Twin system with two Dual Quad-Core / Dual-Core AMD Opteron nodes
» 1U rackmount chassis with a depth of 27.75"
»

Each node supports Quad-Core or Dual-Core AMD Opteron 2000 Series processors, 1000MHz HyperTransport Link

» Each node supports up to 64 GB of Registered ECC DDR2 667/533/400 MHz memory
» Each node supports nVIDIA MCP55V-Pro chipset chipsets
» Each node supports up to 2x 3.5" Hot-Swap SATA Drives with RAID support
» Each node supports two Onboard Gigabit Ethernet controllers
Souris N333
 

Processor & Chipset for each node
CPU Socket Dual 1207-pin Socket F
System Bus 1000MHz Hyper Transport Link
Processor

Quad-Core or Dual-Core AMD Opteron 2000 Series

Number of processors (std/max) 2/2
Processor Cooling Passive Heatsink
Chipset nVIDIA MCP55V-Pro chipset
Memory for each node
Memory Capacity
Supports up to 64 GB of Registered ECC DDR2 667/533/400 MHz memory

Dual branch memory bus

Memory Sockets 16x 240-pin DIMM sockets
DIMM Sizes 256 MB, 512 MB, 1GB, 2GB, 4GB
Error Detection
Corrects single-bit errors, detects double-bit errors (using ECC)
Supports Chipkill technolog
Standard / Integrated Devices for each node
Network Controllers
nVIDIA MCP55V-Pro Dual-Port Gigabit Ethernet Controller

Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output

IPMI
Support for Intelligent Platform Management Interface v.2.0

SIMSO socket

Graphics
XGI Z9S 32MB PCI Graphics Controller

DB-15 VGA port

Super I/O Winbond 83627DHG
Infiniband Mellunox MT25204 20Gbps controller Single-Port (optional)
BIOS
8Mb Flash EEPROM with AMI® BIOS
SST-49LF080A BIOS Chip

Plug and Play (PnP)

DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
I/O Ports for each node
Rear Panel I/O Ports 2x USB 2.0 Ports
2x Gigabit Ethernet interface (10/100/1000 BASE-T RJ-45)
1x VGA port
1x DB-9 serial port
1x External Infiniband Connector (optional)
Internal I/O

4x SATAII-300 onboard ports
2x USB internal headers
2x USB internal ports (Type A)
1x Fast UART 16550 serial header

Management and Health Monitoring
Software
Optional IPMI (Intelligent Platform Management Interface) 2.0

Super Doctor III

Watch Dog

NMI
Power Configurations
ACPI Power Management
Wake-On-LAN (WOL) header
CPU Fan auto-off in sleep mode
Power-on mode control for AC power loss recovery
CPU
Monitors CPU Core Voltages, +3.3V, +5V, ±12V, +5V Standby, HyperTransport Link voltage, memory voltage, VBAT, Chipset voltage
CPU switching voltage regulato
FAN
6x fans w/ tachometer status monitoring
Status monitor for speed on / off control
Temperature
Monitoring for CPU and chassis environment

CPU thermal trip support

Thermal Control for 6x Fan Status
I2C Temperature Sensing Logic
LED
CPU / System Overheat LED
Expansion Slots for each node
Supported Bus Interfaces One PCI Express x16 slot
Expansion Slots 1x low-profile half-length expansion slot
Storage and Media for each node
Number of hard drives supported 2x 3.5" Hot-Swap SATA Drive Bays
Interface type supported SATA
Storage Controllers nVidia MCP55V Pro SATA2 3.0Gbps Controller
RAID capabilities

Onboard nVidia MCP55 ProRAID Controller:
RAID 0, 1, 0+1, 5, JBOD

Additional RAID Capabilities available with add-on RAID controller

Drive Bays None
Chassis and Power Supply
Form Factor Rack
Rack Height 1U
System Cooling
Middle   6x 40mm fans
Chassis Dimensions
Height  1.7" (43mm)
Width 17.2" (437mm)
Depth 27.75" (705mm)
Gross Weight ≈45 lbs (depends on configuration)
Power Supply
980W Cold Swap AC-DC power supply w/ PFC
AC Voltage   100 - 240V, 50-60Hz, 10-4 Amp
+5V standby   4 Amp
+12V   81 Amp
Environment
Operating temperature10 - 35°C (50° to 95° F)
Nonoperating temperature-40 - +70°C (-40° to 158° F)
Humidity (operating)8 - 90% non-condensing
Humidity (nonoperating)5 - 95% non-condensing