Souris C125
Part Number:souris-c125/sys SKU Number:7717
Reviews
0
Click any image to see a larger version.
Souris C125
Souris C125
Highlighted Items are Optional
System Features
» 1U rackmount chassis with a depth of 21"
»

Single Quad-Core or Dual-Core Intel Xeon, Intel Core 2 Quad and Core 2 Duo with 1333/1066/800Mhz FSB

» Up to 8GB DDR2 800 / 667 MHz unbuffered ECC / non-ECC SDRAM
» Intel 3210 chipset and ICH9R + PXH + Intel 82573V + Intel 82573L
» Up to 2x 3.5" Hot-swap SATA Drives with RAID 0 and 1, Support
» Dual PCI-Express Gigabit Ethernet controllers
» One 400W AC Power Supply with PFC
» One full-height PCI expansion slot (Riser Card Required)
Souris C125
 

Processor & Chipset
CPU Socket Single LGA775
System Bus 1333 / 1066 / 800MHz system bus
ProcessorQuad-Core Intel Xeon 3300/3200 series
Dual-Core Intel Xeon E3100/3000 series
Intel Core 2 Quad Q9000/Q6000 series
Intel Core 2 Duo E8000/E6000 series
Intel Pentium dual-core E2000 series
Intel Celeron 400 series
Number of processors (std/max) 1/1
Processor Cooling Passive Heatsink
Chipset
Intel 3210 chipset

ICH9R + PXH + Intel 82573V + Intel 82573L

Memory
Memory Capacity
Up to 8GB DDR2 800/667MHz unbuffered ECC / non-ECC SDRAM

Dual channel memory bus

Memory Sockets 4x 240-pin DIMM sockets
DIMM Sizes 256MB, 512MB, 1GB, 2GB, 4GB
Standard / Integrated Devices
Network Controllers
Two Single-Port Gigabit PCI-E Ethernet Controllers, Intel 82573V + Intel 82573L

Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output

IPMI
Support for Intelligent Platform Management Interface v.2.0

IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support

200-pin IPMI slot for SIMSO(+) and SIMSO-HTC

AOC-SIMSO+ must use Dedicated LAN for KVM-over-LAN function

For Dedicated LAN, cable CBL-0177L must be used
Graphics
On-board ATI ES1000 (32MB) graphics

DB-15 connector for VGA display

Super I/O Winbond 83627HG chip
Clock Generator CK505 chip
BIOS
16Mb Flash EEPROM with Phoenix BIOS

Plug and Play (PnP)

DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
I/O Ports
Front Panel I/O Ports 1x USB 2.0 Ports
Rear Panel I/O Ports 2x USB 2.0 Ports
1x PS/2 keyboard port
1x PS/2 mouse port
2x Gigabit Ethernet interface (10/100/1000 BASE-T RJ-45)
1x DB-15 VGA port
1x DB-9 Fast UART 16550 serial port
Internal I/O

6x SATAII onboard ports
1x 40-pin EIDE port
1x Floppy port
2x Internal USB 2.0 headers and 2x onboard internal ports
1x Fast UART 16550 serial header
1x ECP / EEP Parallel Port

Management and Health Monitoring
Software
Optional IPMI (Intelligent Platform Management Interface) 1.5 / 2.0

Super Doctor III

Watch Dog

W83627DHF(PECI support)
NMI
Power Configurations
ACPI Power Management

Main Switch Override Mechanism

Wake-On-Ring (WOR) header

Wake-On-LAN (WOL) header

Keyboard Wakeup from Soft-Off

Power-on mode for AC power recovery
Suspend to RAM(STR)
Internal / External modem ring-on
CPU
Monitors for CPU Cores ( +1.8V, +3.3V, +5, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset)
Adjustable CPU clock frequency ratio

CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V

FAN
Total of six 4-pin fan headers

6x fans with tachometer monitoring

Status monitor with firmware / software speed control
Status monitor for on/off control

Support 3-pin fans (without speed control)

Low noise fan speed control

Pulse Width Modulated (PWM) fan connectors

Temperature
Monitoring for CPU and chassis environment

CPU thermal trip support

Thermal Monitor (TM2) Support

PECI
LED
CPU / System Overheat LED

+5 Standby alert LED

Other Features
Chassis intrusion detection

Chassis intrusion header

Expansion Slots
Supported Bus Interfaces
1x Universal (x8) PCI-e slot

1x 64 bit PCI-X 133 Mhz slot

1x 32 bit PCI slot

See options below for riser card configurations
Expansion Slots
1x full-height, half-length PCI expansion slot (Riser Card Required)
Storage and Media
Number of hard drives supported 2x 3.5" Hot-swap SATA Drives
Interface type supported SATA (Depends on the RAID controller you select)
Storage Controllers
Onboard Intel ICH9R SATA II (3 Gbps) controller

Add on SATA RAID Controllers available (Optional)

Drive Bays
  • 1x bay for slim-line CD-ROM, CD-RW/DVD combo drive, or DVD±RW
  • 1x 5.25" external bay
  • RAID capabilities Onboard Software RAID Controller:
    RAID 0, 1, 5, 10 support (Windows only)
    RAID 0, 1, 10 support (Linux)
    Add on SATA RAID Controllers available for additional RAID capabilities (Optional)
    Chassis and Power Supply
    Form Factor Rack
    Rack Height 1U
    System Cooling
    Rear   2x 40mm
    Middle  3x 40mm
    Chassis Dimensions
    Height  1.75" (44mm)
    Width 

    19.0" (482mm)

    Depth 

    21.0" (533mm)

    Gross Weight ≈22lbs (depends on configuration)
    Power Supply
    400W non-redundant AC power supply w/ PFC
    Environment
    Operating temperature 10 - 35°C (50° to 95° F)
    Nonoperating temperature -40 - +70°C (-40° to 158° F)
    Humidity (operating) 8 - 90% non-condensing
    Humidity (nonoperating) 5 - 95% non-condensing