Souris C112
Souris C112
Part Number:souris-c112/sys SKU Number:7715
Reviews
0
Click any image to see a larger version.
Souris C112
Highlighted Items are Optional
System Features
» Front Access I/O Mini 1U rackmount chassis with a depth of 14.0" (356mm)
»

Single Quad-Core or Dual-Core Intel Xeon, Intel Core 2 Quad and Core 2 Duo with 1333/1066/800Mhz FSB

» Up to 8GB DDR2 800 / 667 MHz unbuffered ECC / non-ECC SDRAM
» Intel 3210 chipset and ICH9R + PXH + Intel 82573V + Intel 82573L
» Up to 2x 2.5" Internal SATA Drives with RAID 0, 1
» Dual PCI-Express Gigabit Ethernet controllers
» One 420W AC Power Supply with PFC
» One Front full-height, half-length front I/O PCI expansion slot (Riser Card Required)
Souris C112
 

Processor & Chipset
CPU Socket Single LGA775
System Bus 1333 / 1066 / 800MHz system bus
Processor
  • Quad-Core Intel Xeon 3300/3200 series
    Dual-Core Intel Xeon E3100/3000 series
    Intel Core 2 Quad Q9000/Q6000 series
    Intel Core 2 Duo E8000/E6000 series
    Intel Pentium dual-core E2000 series
    Intel Celeron 400 series
  • Quad-Core and Dual-Core Intel Core 2 Processor
  • Number of processors (std/max) 1/1
    Processor Cooling Passive Heatsink
    Chipset
    Intel 3210 chipset

    ICH9R + PXH + Intel 82573V + Intel 82573L

    Memory
    Memory Capacity
    Up to 8GB DDR2 800/667MHz unbuffered ECC / non-ECC SDRAM

    Dual channel memory bus

    Memory Sockets 4x 240-pin DIMM sockets
    DIMM Sizes 256MB, 512MB, 1GB, 2GB, 4GB
    Standard / Integrated Devices
    Network Controllers
    Two Single-Port Gigabit PCI-E Ethernet Controllers, Intel 82573V + Intel 82573L

    Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output

    IPMI
    Support for Intelligent Platform Management Interface v.2.0

    200-pin IPMI slot for SIMSO(+) and SIMSO-HTC

    AOC-SIMSO+ must use Dedicated LAN for KVM-over-LAN function

    For Dedicated LAN, cable CBL-0177L must be used
    Graphics
    On-board ATI ES1000 (32MB) graphics

    DB-15 connector for VGA display

    Super I/O Winbond 83627HG chip
    Clock Generator CK505 chip
    BIOS
    16Mb Flash EEPROM with Phoenix BIOS

    Plug and Play (PnP)

    DMI 2.3
    PCI 2.2
    ACPI 1.0 / 2.0
    USB Keyboard support
    SMBIOS 2.3
    I/O Ports
    Front Panel I/O Ports 2x USB 2.0 Ports
    1x PS/2 keyboard port
    1x PS/2 mouse port
    2x Gigabit Ethernet interface (10/100/1000 BASE-T RJ-45)
    1x DB-15 VGA port
    1x DB-9 Fast UART 16550 serial port
    Internal I/O

    6x SATAII onboard ports
    1x 40-pin EIDE port
    1x Floppy port
    2x Internal USB 2.0 headers and 2x onboard internal ports
    1x Fast UART 16550 serial header
    1x ECP / EEP Parallel Port

    Management and Health Monitoring
    Software
    Optional IPMI (Intelligent Platform Management Interface) 1.5 / 2.0

    Super Doctor III

    Watch Dog

    W83627DHF(PECI support)
    NMI
    Power Configurations
    ACPI Power Management

    Main Switch Override Mechanism

    Wake-On-Ring (WOR) header

    Wake-On-LAN (WOL) header

    Keyboard Wakeup from Soft-Off

    Power-on mode for AC power recovery
    Suspend to RAM(STR)
    Internal / External modem ring-on
    CPU
    Monitors for CPU Cores ( +1.8V, +3.3V, +5, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset)
    Adjustable CPU clock frequency ratio

    CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V

    FAN
    Total of six 4-pin fan headers

    6x fans with tachometer monitoring

    Status monitor with firmware / software speed control
    Status monitor for on/off control

    Support 3-pin fans (without speed control)

    Low noise fan speed control

    Pulse Width Modulated (PWM) fan connectors

    Temperature
    Monitoring for CPU and chassis environment

    CPU thermal trip support

    Thermal Monitor (TM2) Support

    PECI
    LED
    CPU / System Overheat LED

    +5 Standby alert LED

    Other Features
    Chassis intrusion detection

    Chassis intrusion header

    Expansion Slots
    Supported Bus Interfaces
    1x Universal (x8) PCI-e slot

    1x 64 bit PCI-X 133 Mhz slot

    1x 32 bit PCI slot

    See options below for riser card configurations
    Expansion Slots
    1x full-height, half-length PCI expansion slot (Riser Card Required)
    Storage and Media
    Number of hard drives supported 2x 2.5" Internal SATA Drives
    Interface type supported SATA
    Storage Controllers
    Onboard Intel ICH9R SATA2 (3 Gbps) controller
    RAID capabilities Onboard Software RAID Controller:
    RAID 0, 1, 5, 10 support (Windows only)
    RAID 0, 1, 10 support (Linux)
    Chassis and Power Supply
    Form Factor Rack
    Rack Height 1U
    System Cooling
    Rear  3x counter-rotating fans (40 x 50 x 38)mm
    Chassis Dimensions
    Height 1.7" (43mm)
    Width 

    16.8" (426mm)

    Depth 

    14.0" (356mm)

    Gross Weight ≈14.5 lbs (depends on configuration)
    Power Supply
    420W non-redundant AC power supply w/ PFC
    AC Voltage  

    100 - 240V, 50 - 60Hz, 7 Amp

    +5V  

    30.0 Amp

    +5V standby   2.0 Amp
    +12V   15.0 Amp
    -12V   1.0 Amp
    +3.3V   20.0 Amp

    Power Supply Safety / EMC
    USA - UL listed, FCC

    Canada - CUL listed

    China - CCC Mark
    Europe/CE Mark
    EN 60950/IEC 60950-Compliant
    Germany - TUV Certified
    Environment
    Operating temperature10 - 35°C (50° to 95° F)
    Nonoperating temperature-40 - +70°C (-40° to 158° F)
    Humidity (operating)8 - 90% non-condensing
    Humidity (non-operating)5 - 95% non-condensing