Souris C161
Part Number:souris-c161/sys SKU Number:7678
Reviews
0
Click any image to see a larger version.
Souris C161
Souris C161
Souris C161
Souris C161
Highlighted Items are Optional
System Features
» 1U rackmount chassis with a depth of 19.8" (503mm)
»

Single Quad-Core or Dual-Core Intel Xeon, Intel Core 2 Quad and Core 2 Duo with 1333/1066/800Mhz FSB

» Up to 8GB DDR2 800 / 667 MHz unbuffered ECC / non-ECC SDRAM
» Intel 3210 chipset and ICH9R + PXH + Intel 82573V + Intel 82573L
» Up to 4x 3.5" Hot-swap SATA Drives with RAID 0, 1, 5, 10 Support
» Dual PCI-Express Gigabit Ethernet controllers
» Power supply options include: non-redundant 520W AC or non-redundant -48V DC 410W power supplies
» One full-height, half-length expansion slot (Riser Card Required)
Souris C161
 

Processor & Chipset
CPU Socket Single LGA775
System Bus 1333 / 1066 / 800MHz system bus
Processor

Quad-Core Intel Xeon 3300/3200 series
Dual-Core Intel Xeon E3100/3000 series
Intel Core 2 Quad Q9000/Q6000 series
Intel Core 2 Duo E8000/E6000 series
Intel Pentium dual-core E2000 series
Intel Celeron 400 series

Number of processors (std/max) 1/1
Processor Cooling Passive Heatsink
Chipset
Intel 3210 chipset

ICH9R + PXH + Intel 82573V + Intel 82573L

Memory
Memory Capacity
Up to 8GB DDR2 800/667MHz unbuffered ECC / non-ECC SDRAM

Dual channel memory bus

Memory Sockets 4x 240-pin DIMM sockets
DIMM Sizes 256MB, 512MB, 1GB, 2GB, 4GB
Standard / Integrated Devices
Network Controllers
Two Single-Port Gigabit PCI-E Ethernet Controllers, Intel 82573V + Intel 82573L

Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output

IPMI
Support for Intelligent Platform Management Interface v.2.0

IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support

200-pin IPMI slot for SIMSO(+) or SIMSO-HTC

AOC-SIMSO+ must use Dedicated LAN for KVM-over-LAN function

For Dedicated LAN, cable CBL-0177L must be used
Graphics
On-board ATI ES1000 (32MB) graphics

DB-15 connector for VGA display

Super I/O Winbond 83627HG chip
Clock Generator CK505 chip
BIOS
16Mb Flash EEPROM with Phoenix BIOS

Plug and Play (PnP)

DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
I/O Ports
Front Panel I/O Ports 2x USB 2.0 Ports (optional)
1x DB-9 Fast UART 16550 serial port (optional)
Rear Panel I/O Ports2x USB 2.0 Ports
1x PS/2 keyboard port
1x PS/2 mouse port
2x Gigabit Ethernet interface (10/100/1000 BASE-T RJ-45)
1x DB-15 VGA port
1x DB-9 Fast UART 16550 serial port
Internal I/O

6x SATAII onboard ports
1x 40-pin EIDE port
1x Floppy port
2x Internal USB 2.0 headers and 2x onboard internal ports
1x Fast UART 16550 serial header
1x ECP / EEP Parallel Port

Management and Health Monitoring
Software
Optional IPMI (Intelligent Platform Management Interface) 1.5 / 2.0

Super Doctor III

Watch Dog

W83627DHF(PECI support)
NMI
Power Configurations
ACPI Power Management

Main Switch Override Mechanism

Wake-On-Ring (WOR) header

Wake-On-LAN (WOL) header

Keyboard Wakeup from Soft-Off

Power-on mode for AC power recovery
Suspend to RAM(STR)
Internal / External modem ring-on
CPU
Monitors for CPU Cores ( +1.8V, +3.3V, +5, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset)
Adjustable CPU clock frequency ratio

CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V

FAN
Total of six 4-pin fan headers

6x fans with tachometer monitoring

Status monitor with firmware / software speed control
Status monitor for on/off control

Support 3-pin fans (without speed control)

Low noise fan speed control

Pulse Width Modulated (PWM) fan connectors

Temperature
Monitoring for CPU and chassis environment

CPU thermal trip support

Thermal Monitor (TM2) Support

PECI
LED
CPU / System Overheat LED

+5 Standby alert LED

Other Features
Chassis intrusion detection

Chassis intrusion header

Expansion Slots
Supported Bus Interfaces
1x Universal (x8) PCI-e slot

1x 64 bit PCI-X 133 Mhz slot

1x 32 bit PCI slot

See options below for riser card configurations
Expansion Slots
1x full-height, half-length PCI expansion slot (Riser Card Required)
Storage and Media
Number of hard drives supported 4x 3.5" Hot-swap SATA II Drive Bays
Interface type supported SATA II (Depends on the RAID controller you select)
Storage Controllers
Onboard Intel ICH9R SATA II (3 Gbps) controller

Add on SATA II RAID Controllers available (Optional)

RAID capabilities Onboard Software RAID Controller:
RAID 0, 1, 5, 10 support (Windows only)
RAID 0, 1, 10 support (Linux)
Add on SATA II RAID Controllers available for additional RAID capabilities (Optional)
Drive Bays
1x bay for slim-line CD-ROM, CD-RW/DVD combo drive, or DVD±RW
Chassis and Power Supply
Form Factor Rack
Rack Height 1U
System Cooling
Center  4x 4cm 12,500 RPM fans
Chassis Dimensions
Height 1.7" (43mm)
Width 

17.2" (437mm)

Depth 

19.8" (503mm)

Gross Weight ≈ 31 lbs (depends on configuration)
Optional Power Supply
520W non-redundant AC power supply w/ PFC
AC Voltage  

100 - 240V, 50 - 60Hz, 7 - 3Amp

+5V  

20 Amp

+5V standby   3 Amp
+12V   39 Amp
-12V   0.5 Amp
+3.3V   16 Amp

410W non-redundant DC power supply
DC Voltage   Range = -36V to -72V. Nominal = -48V . Max Input Current = 18A
+5V  

35 Amp

+5V standby   3 Amp
+12V   32 Amp
-12V   0.5 Amp
+3.3V   20 Amp


Power Supply Safety / EMC
USA - UL listed, FCC

Canada - CUL listed

China - CCC Mark
Europe/CE Mark
EN 60950/IEC 60950-Compliant
Germany - TUV Certified
Environment
Operating temperature10 - 35°C (50° to 95° F)
Nonoperating temperature-40 - +70°C (-40° to 158° F)
Humidity (operating)8 - 90% non-condensing
Humidity (nonoperating)5 - 95% non-condensing