Souris M333
Souris M333
Part Number:souris-m333/sys SKU Number:7584
Click any image to see a larger version.
Souris M333
Highlighted Items are Optional
System Features
The Souris M333 is a 1U twin system designed to increase computing density while reducing cost, energy and space requirements. With two systems (or two nodes) within a 1U space, the Souris M333 can support up to 16 processor cores - two systems each housing two quad-core Intel® Xeon® Processor 5400 Series.

» 1U Twin system with two Dual Quad-Core Xeon nodes
» 1U rackmount chassis with a depth of 27.75"

Each node supports Dual Intel® 64-bit Xeon® Quad-Core or Dual-Core processors, with 1600 / 1333 / 1066 MHz FSB

» Each node supports up to 64GB DDR2 800 / 667 / 533 SDRAM of Fully Buffered memory
» Each node supports Intel® 5400 (Seaburg) chipsets
» Each node supports up to 2x 3.5" Hot-Swap SATA Drives with RAID support
» Each node supports two Onboard PCI-Express Gigabit Ethernet controllers
Souris M333

Processor & Chipset for each node
CPU Socket Dual LGA 771
System Bus 1600 / 1333 / 1066 MHz system bus

Quad-Core Intel Xeon Processor
Dual-Core Intel Xeon Processor

Number of processors (std/max) 2/2
Processor Cooling Passive Heatsink
Intel® 5400 (Seaburg) chipset


Memory for each node
Memory Capacity
Up to 64GB of Interleaved Fully Buffered DDR2 800MHz SDRAM memory

Dual branch memory bus

Memory Sparing supported
Memory Sockets 8x 240-pin DIMM sockets
DIMM Sizes 256MB, 512MB, 1GB, 2GB, 4GB, 8GB
Error Detection
Corrects single-bit errors

Detects double-bit errors (using ECC memory)

Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
Standard / Integrated Devices for each node
Network Controllers
Intel (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller

Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output

Intel® I/OAT support for fast, scaleable, and reliable networking
Support for Intelligent Platform Management Interface v.2.0 / 1.5

200-pin IPMI slot (SIMSO(+))

ATI ES1000 controller with 32 MB of video memory

DB-15 connector for VGA display

Super I/O Winbond 83627HF chip
Clock Generator CK410B
Infiniband Mellanox MT25204AD-FCC-D Single-Port (optional)
8Mb Flash EEPROM with Phoenix® BIOS

Plug and Play (PnP)

DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
I/O Ports for each node
Rear Panel I/O Ports 2x USB 2.0 Ports
2x Gigabit Ethernet interface (10/100/1000 BASE-T RJ-45)
1x ECP / EEP parallel port
1x DB-9 serial port
1x External Infiniband Connector (optional)
Internal I/O

4x SATAII-300 onboard ports
2x Internal USB 2.0 headers
1x Fast UART 16550 serial header

Management and Health Monitoring
Optional IPMI (Intelligent Platform Management Interface) 1.5 / 2.0

Super Doctor III

Watch Dog

Power Configurations
ACPI Power Management

Main Switch Override Mechanism

Wake-On-Ring (WOR) header

Wake-On-LAN (WOL) header

Wake-On-Ring (WOR) header

Power-on mode for AC power recovery
Internal / External modem ring-on
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.

5 Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V

Total of eight 4-pin fan headers supporting up to 8 fans

8x fans with tachometer status monitoring

Status monitor for speed control

Support 3-pin fans (w/o speed control)

Pulse Width Modulated (PWM) fan connectors

Monitoring for CPU and chassis environment

CPU thermal trip support

Thermal Control for 8x fan connectors

PC temperture sensing logic
Thermal Monitor 2 (TM2) support
CPU / System Overheat LED

UID / Remote UID

Other Features
Chassis intrusion detection

Chassis intrusion header

SDDC Support

Expansion Slots for each node
Supported Bus Interfaces One PCI-e x16 Generation 2.0 slot
Expansion Slots 1x low-profile half-length expansion slot
Storage and Media for each node
Number of hard drives supported 2x 3.5" Hot-Swap SATA Drive Bays
Interface type supported SATA
Storage Controllers Onboard Intel ESB2 SATA 3.0Gbps Controller
RAID capabilities Onboard Software RAID Controller:
RAID 0, 1, 5, 10 support (Windows only)
RAID 0, 1, 10 support (Linux)
Drive Bays None
Chassis and Power Supply
Form Factor Rack
Rack Height 1U
System Cooling
Middle   6x 40mm fans
Chassis Dimensions
Height  1.7" (43mm)
Width 17.2" (437mm)
Depth 27.75" (705mm)
Gross Weight ≈45 lbs (depends on configuration)
Power Supply
980W Cold Swap AC-DC power supply w/ PFC
AC Voltage   100 - 240V, 50-60Hz, 10-4 Amp
+5V standby   4 Amp
+12V   81 Amp
Operating temperature10 - 35°C (50° to 95° F)
Nonoperating temperature-40 - +70°C (-40° to 158° F)
Humidity (operating)8 - 90% non-condensing
Humidity (nonoperating)5 - 95% non-condensing