150W Flex ATX Power Supply
150W Flex ATX Power Supply
 Part Number: SPI150FA   SKU Number: 8888
Price:
$68.00
Click any image to see a larger version.
150W Flex ATX Power Supply
  • Complied with Flex ATX and ATX12V standard
  • Active Power Factor Correction (PFC) meet EN61000-3-2
  • High efficiency and reliability
  • Compatible with European Union Directive 2002/95/EC
  • (Restriction on Hazardous Substances).
  • Remote ON/OFF function
  • Designed for a 1U Chassis
  • Internal 12V DC fan included
  • Low noise and ripple
  • Output over voltage, short circuit, and over current protection
  • 100% Hi-pot, ATE, and burn-in tested
  • Re-settable power shut down
  • Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
  • Approved by UL/CUL 60950-1,NEMKO EN60950-1 (CB Report) CE ,FCC,EMC report

Temperature Range

Operating: 0°C ~ +50°C; storage & shipping: -20°C ~ +80°C

Humidity 85% on operating, 95% on storage
Dielectric Withstand Primary frame ground 1800V AC for 1 second
Efficiency 68% minimum.
Rise time Less than 20ms
Hold-up Time 17ms minimum at nominal input voltage
Power Good Signal Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
Leakage Current Less than 3.5mA at 264Vac, 50Hz
MTBF 100,000 hours on maximum load at +25°C
Dimensions (LxWxH) 150x81.5x40.5mm /6x3.2x1.6inch
Output Wattage 150W
Output
Output Voltage +3.3V +5V +12V1 -12V +5Vsb
Minimum Load 0.3A 0.3A 1.0A 0.0A 0.0A
Normal Load 5A 6.5A 5A 0.25A 1.00A
Maximum Load 10A 13A 10A 0.5A 2.0A
Load Reg. ± 5% ± 5% ± 5% ± 10% ± 5%
Ripple & Noise 50mV P-P 50mV P-P 120mV P-P 120mV P-P 50mV P-P
Note: Power Cable Not Included. Compatable Power Cable Can Be Found Here. 
Main Product  
Part Number:SPI150FA
150W Flex ATX Power Supply
$68.00
Quantity:
Customers who bought this product also purchased