60w output (80w peak), 6V-26VDC input DC-DC Miniature ATX Power Supply
 Part Number: picoPSU-60-WI   SKU Number: 2019
Price:
$75.00
Temporarily Sold Out
Click any image to see a larger version.
60w output (80w peak), 6V-26VDC input DC-DC Miniature ATX Power Supply
60w output (80w peak), 6V-26VDC input DC-DC Miniature ATX Power Supply
60w output (80w peak), 6V-26VDC input DC-DC Miniature ATX Power Supply
Features:
  • 60 watts / 80 watt peak
  • 6-26VDC input
  • 100% silent, fanless
  • Over 94% efficiency
  • Plugs directly into the ATX connector
  • Compatible with VIA C3/C7 or Intel / AMD CPU with V(core) from 5V rail
  • ROHS compliant
NOTE : This PSU cannot power 3.5" drives and 5.25" CDROMS, please use 2.5" drives or SlimCds or FlashDisk for your systems due to limited 12V rail output capabilities. This PSU is guaranteed to work with any VIA mini-ITX board or Pentium-M / core solo or core duo that gets V(core) from the 5V rail. These types of motherboards use only 50-150mA on the 12V rail

The picoPSU-60-WI is the smallest snap-in 6-26VDC ATX dc-dc power supply. The picoPSU is compatible with an entire range of mini-itx motherboards as well as regular boards. The picoPSU-60-WI provides a cool, silent 60 Watts/ 80 Watt peak of power for small PC designs using a single 6-26VDC power source.

Small computer projects start with small power supplies. PicoPSU-60-WI is a crucial key component that unleashes the ultimate power solution for general purpose computing platforms. PicoPSU-60-WI is fully ATX compliant PSU, making it an excellent candidate for any silent, fanless and small 6-26V DC-DC ATX PC power supply project.

Cool power. Operating at only 6-26V, the picoPSU-60-WI dc-dc ATX power supply delivers 60 Watts/ 80Watt peak of power. picoPSU provides plenty of power (via ATX connector and HDD cable harness) for CPU and an entire range of peripherals.

100% Silent The picoPSU-60-WI mini PSU is a 100% silent fanless dc to dc solution. No fans, no noise, just power for small and silent PCs.

picoPSU-60-WI is a fully compliant DC-DC ATX PC PSU. It can power VIA mini-ITX boards with C3 or C7 processors, Pentium-M, Core Duo Mobile that gets V(core) from the 5V rail.

picoPSU-60-WI ATX DC-DC converter is very small, measuring just 31x45x20mm, about the size of two AA batteries, picoPSU-60-WI is also 1U ServerRack compliant.

Main Specifications
Input Voltage 6-26VDC un-regulated, min=2A, max=10A (load dependent)
Output Wattage 60 watts / 80 watt peak*
*At max load, forced air ventilation is required. Peak load should not exceed 60 seconds.
Power Ratings
(Max Load = 80 Watts)
Volts (V) Max Load (A) Peak Load (A) Regulation %
5V 6A 10A +/- 1.5%
5VSB 1.5A 2A +/- 1.5%
3.3V 6A 8A +/- 1.5%
-12V 0.05A 0.05A +/- 5%
12V 400mA 450mA +/- 3%
At max load, forced air ventilation is required. For fanless operation de-rate the output of the 3.3 and 5V rails by ~20%. Peak load should not exceed 60 seconds.
DC-Jack Female, panel mount, 2.5 x 5.5 x 10 mm
Requires 5mm/2.5mm male barrel jack
Overload protection Over load protection will be effected when either of the loads (+5V & +3.3V) exceeds > 200% Max Load
Turn-on Delay After turning on, at least 20 ms will be needed for the rise of +5VSB output voltage (measured from 10% to 95%) to reach its peak
Remote ON/OFF control Logic level is LOW - Output voltage is enabled (PS_ON pin)
Logic level is HIGH - Output voltage is disabled (PS_ON pin)
Operating environment Temperature: -40 to 85 degree centigrade
Relative Humidity: 10 to 90 percent, non-condensing
Efficiency 95%
MTBF 150K hours at 55° Celsius
Size 44.5mm(L) x 20mm(W) x 30mm (H) (1U compliant)
Weight 65grams, including cable harness, 35 grams without cable harness
Related Products
PCI Rear Slot Cover for all circular power connectors PCI Rear Slot Cover for all circular power connectors
SKU: 2033    MFG Part #: PCI-RPOW    Price: $1.19
Main Product  
Part Number:picoPSU-60-WI
60w output (80w peak), 6V-26VDC input DC-DC Miniature ATX Power Supply
$75.00
Temporarily Sold Out
Quantity:
Customers who bought this product also purchased