- Quad view at up to 15 frames/second
- Built-in 3 area selectable Video Motion Detection
- Supports RTOS (Real-time Operating System)
- Built-in web server for video management and camera control
- RoHS-ready product
Introduction The VPort 2141 is an advanced, RoHS-ready, 4-channel MJPEG video encoder that adopts a new chip solution to bring quad view up to 15 FPS. This new video server includes most of the key functions of the MOXA VPort 2140, but also provides additional advanced functions, such as privacy mask, PPPoE, UPnP, and DDNS. The MOXA VPort 2141 Video Server comes equipped with a 4-ch video input, image compressor with MJPEG compression, 3 area-selectable window, and web server with 10/100 Mbps Ethernet interface. It can digitize analog video sources and distribute digital images over an IP network. In addition, the VPort 2141 comes equipped 4 digital inputs (DIs) and 4 relay outputs (DOs) to connect with sensors and alarms. Ordering Information
| VPort 2141 | 4-ch MJPEG Video Encoder with 100-240V power adaptor (12 VDC, 1.5A, or 12 VDC, 1.25A for UK plug) | | Items included with this product | - 1 VPort 2141 Video Server
- CD with User's Manual, SoftDVR Lite IP Surveillance Software
- Quick Installation Guide
- Power Adaptor
- Null Modem Cable
- PTZ Camera Control Cable
- I/O Terminal Block Kit | | | | Video Inputs (BNC) | 4 (with 75 ohm impedance DIP switch) | | NTSC/PAL | Auto detect or manual | Protocols
| TCP/IP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP, DDNS, UPnP, and PPPoE | | Ethernet | 10BaseT Ethernet or 100BaseT Fast Ethernet auto negotiation | | Video Compression | JPEG, MJPEG | | Video Resolution | NTSC:
Up to 30 frames at 176 x 112
Up to 30 frames at 352 x 240
Up to 10 frames at 704 x 480
Up to 15 frames at Quad
PAL:
Up to 25 frames at 176 x 144
Up to 25 frames at 352 x 288
Up to 10 frames at 704 x 576
Up to 15 frames at Quad | Video Viewing
| - Adjustable image size and quality
- B/W or color control
- Timestamp and text overlay
- Quad screen display
- 5 primacy mask for each camera | | COM1 | RS-232 in DB9, male
Max. 115.2 Kbps | | COM2 | RS-485 in Terminal Block
Max. 115.2 Kbps | | Digital Input | 4 (max. 12 VDC@ 50 mA) | | Relay Output (DO) | 4 (max. 24 VDC@ 1A, 125 VAC@ 0.5A) | | NETWORK | ACTIVE, LINK, FDX (full duplex) | | System | POWER, CONNECT, SERIAL | | Dimensions (W x D x H ) | 146.2 x 163.2 x 40 mm | | Weight | 820 g | | Installation | Wall Mounting, DIN-Rail Mounting (Optional kit) | | External Power Input | Terminal Block for 12~15 VDC/AC, min. 1.5A | | Power Output | Terminal Block for 12 VDC, max. 500 mA | | Input | 100-240 VAC, 12 VDC, 1.5A | | Consumption | near 8W
| Operating Temperature
| 0 to 60°C (32 to 140°F) | | Storage Temperature | -40 to 70°C (-40 to 158°F) | | Humidity | 5 to 95% (non-condensing) | | Regulatory Approvals | CE, FCC | | Warranty | 5 years | | Motion Detection | With percentage and sensitivity | | Timing Schedule | repeated daily | | Pre/Trigger/Post Alarm | With 15 color images per camera (pre/Trigger/Post alarm: 7/1/7) | | Stored Image Transfer | Automatic transfer of stored images via email or FTP with event-triggered actions | | PTZ Camera Control | Multiple PTZ camera control via RS-232/485 | | Supported Devices and Protocols | Sony VISCA, Cannon VC-C3/VC-C1/VC-C4, Dynacolor Smart DOME, Pelco D protocol, Liling, Ernitec, Custom camera | | CGI command driver | Support | | Upgrade methods | System firmware upgradable via bundled utility | Password Protection
| User level password protection | Browser
| Internet Explorer 4.x or above
Netscape Navigator 4.x or above | MOXA SoftDVR™ Lite
| 1- to 4-ch IP Surveillance Software for viewing and recording |  | VPort 2141 Datasheet
Learn more information about the VPort 2141 including technical information and ordering information | | |
