| Processor & Chipset |
| CPU Socket | Dual 1207-pin Socket F |
| System Bus | 1000MHz HyperTransport |
| Processor | Quad-Core or Dual-Core AMD Opteron 2000 Series |
| Number of processors (std/max) | 2/2 |
| Processor Cooling | Passive Heatsink |
| Chipset | nVidia MCP55 Pro Chipset |
| Memory |
| Memory Capacity | | • | Supports up to 64 GB DDR2 667/533/400 MHz memory | | • | Dual channel memory bus | |
| Memory Sockets | 16x 240-pin DIMM sockets |
| DIMM Sizes | 256 MB, 512 MB, 1GB, 2GB, 4GB |
| Standard / Integrated Devices |
| Network Controllers | | • | nVidia MCP55 Pro Chipset Dual-port Ethernet Controller | | • | Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | |
| IPMI | | • | Support for Intelligent Platform Management Interface v.2.0 | | • | 200-pin IPMI slot for (SIMLP) | |
| Graphics | | • | ATI ES1000 16MB Graphics Controller | | • | DB-15 VGA port | |
| Super I/O | Winbond 83627HF |
| BIOS | | • | 8Mb Flash EEPROM with AMI® BIOS | | • | Plug and Play (PnP)
| | • | DMI 2.3 | | • | PCI 2.2 | | • | ACPI 2.0 | | • | BIOS Rescue Hot Keys | | • | USB Keyboard support | | • | Hardware BIOS Virus Protection | | • | SMBIOS 2.3 | |
| I/O Ports |
| Front Panel I/O Ports | 2x USB 2.0 Ports |
| Rear Panel I/O Ports | 2x USB 2.0 Ports
1x PS/2 keyboard port
1x PS/2 mouse port
2x Gigabit Ethernet interface (10/100/1000 BASE-T RJ-45)
1x DB-15 VGA port
1x serial port |
| Internal I/O | 6x SATA II-300 onboard ports
1x 40-pin EIDE port
1x Floppy port
4x Internal USB 2.0 headers
1x serial header |
| Management and Health Monitoring |
| Software | | • | Optional IPMI (Intelligent Platform Management Interface) 2.0 | | • | Super Doctor III | | • | Watch Dog | |
| Power Configurations | | • | ACPI Power Management | | • | Wake-On-Ring (WOR) header | | • | Wake-On-LAN (WOL) header | | • | Keyboard Wakeup from Soft-Off | | • | Power-on mode for AC power recovery | | • | Internal / External modem ring-on | |
| CPU | | • | Monitors CPU Core Voltages, +1.5V, +3.3V, +5V, ±12V, 5V Standby, HyperTransport Link voltage 1.2V, memory voltage 1.8V, VBAT | | • | CPU switching voltage regulator | |
| FAN | | • | Up to 8-fan status tachometer monitoring | | • | Up to six 3-pin & two 4-pin fan headers | | • | Status monitor for speed control | | • | Status monitor for on/off control | | • | Low noise fan speed control | | • | Pulse Width Modulated (PWM) fan connectors | |
| Temperature | | • | Monitoring for CPU and chassis environment | | • | CPU thermal trip support | | • | Thermal Control for 8x Fan Connectors | | • | I2C Temperature Sensing Logic | |
| LED | | • | CPU / System Overheat LED | | • | +5V Standby Alert LED | | • | Suspend-State Indicator LED | | • | UID/Remote LED | |
| Other Features | | • | Chassis intrusion detection | | • | Chassis intrusion header | |
| Expansion Slots |
| Supported Bus Interfaces | 2x 8 PCI-Express
2x 64-bit 133/100MHz PCI-X
2x 64-bit 100MHz PCI-X |
| Expansion Slots | 7x full-height full-length expansion slots |
| Storage and Media |
| Number of hard drives supported | 8x 3.5" Hot-swap SATA Drive Bays |
| Interface type supported | SATA |
| Storage Controllers | | • | nVidia MCP55 Pro SATA2 3.0Gbps Controller | | • | Add on SATA RAID Controllers available | |
| RAID capabilities | Onboard nVidia MCP55 ProRAID Controller:
RAID 0, 1, 0+1, 5, JBOD Additional RAID Capabilities available with add-on RAID controller
|
| Drive Bays | | • | 1x bay for slim-line CD-ROM, CD-RW/DVD combo drive, or DVD±RW | | • | 2x 3.5" bays for floppy drive, card reader or CF adapter | | • | 1x 5.25" bay |
|
| Chassis and Power Supply |
| Form Factor | Rack |
| Rack Height | 4U |
| System Cooling | | Middle | | 3x 5000 RPM Hot-Swappable Fans | | Rear | | 2x 5000 RPM Hot-Swappable Fans | |
| Chassis Dimensions | | Height | | 7.0" (178mm) | | Width | | 17.2" (437mm) | | Depth | | 25.5" (648mm) |
|
| Gross Weight | ≈58 lbs (depends on configuration) |
Power Supply
| | 800W AC power supply w/ PFC | | AC Voltage | | 100 - 240V, 50-60Hz, 10-4 Amp | | +5V | | 30 Amp | | +5V standby | | 4 Amp | | +12V | | 66 Amp | | -12V | | 0.6 Amp | | +3.3V | | 24 Amp |
| 800W (1 + 1) Redundant AC-DC high-efficiency power supply w/ PFC | | AC Voltage | | 100 - 240V, 50-60Hz, 10-4 Amp | | +5V | | 30 Amp | | +5V standby | | 4 Amp | | +12V | | 66 Amp | | -12V | | 0.6 Amp | | +3.3V | | 24 Amp |
Power Supply Safety / EMC | • | USA - UL listed, FCC | | • | Canada - CUL listed | | • | Germany - TUV Certified | | • | EN 60950/IEC 60950-Compliant | | • | CB Report | | • | CCC Certification | |
| Environment |
| Operating temperature | 10 - 35°C (50° to 95° F) |
| Non operating temperature | -40 - +70°C (-40° to 158° F) |
| Humidity (operating) | 8 - 90% non-condensing |
| Humidity (non operating) | 5 - 95% non-condensing |
