| Processor & Chipset |
| CPU Socket | Single 940-pin AM2 Socket |
| System Bus | 1000MHz HyperTransport |
| Processor | Dual-Core / Quad-Core AMD Opteron 1000 Series |
| Number of processors (std/max) | 1/1 |
| Processor Cooling | Active Heatsink |
| Chipset | nVidia MCP55 Pro |
| Memory |
| Memory Capacity | | • | Up to 8GB DDR2 800/667/533 MHz unbuffered ECC / non-ECC SDRAM | | • | Dual channel memory bus | |
| Memory Sockets | 4x 240-pin DIMM sockets |
| DIMM Sizes | 256MB, 512MB, 1GB, 2GB |
| Memory Voltage | 1.8V only |
| Standard / Integrated Devices |
| SATA | nVidia MCP55 Pro SATA2 3.0Gbps Controller 6 SATA Ports SATA RAID 0, 1, 0+1, 5, JBOD Support |
| IDE | ATA/100/133, UDMA Mode 5, PIO Mode 4 |
| Network Controllers | | • | nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller | | • | Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | |
| IPMI | | • | Support for Intelligent Platform Management Interface v.2.0 | | • | IPMI slot for AOC SIM1U(+) modules | | • | The AOC SIM1U+ card requires a expansion slot for dedicated LAN. | | • | Support KVM Over LAN with the AOC SIM1U+ module only | | • | IPMI module is not included | |
| Graphics | | • | ATI ES1000 Graphics Controller 16MB Graphics | | • | DB-15 connector for VGA display |
|
| Super I/O | Winbond 83627HF chip |
| BIOS | | • | 4Mb Flash EEPROM with AMI BIOS | | • | Plug and Play (PnP)
| | • | DMI 2.3 | | • | PCI 2.2 | | • | ACPI 1.0 / 2.0 | | • | USB Keyboard support | | • | BIOS Rescue Hot Keys | | • | Hardware BIOS Virus Protection | | • | SMBIOS 2.3 | |
| I/O Ports |
| Front Panel I/O Ports | 2x USB 2.0 Ports (from headers) |
| Rear Panel I/O Ports | 2x USB 2.0 Ports 1x PS/2 keyboard port 1x PS/2 mouse port 2x RJ-45 LAN ports1x DB-15 VGA port 1x DB-9 Fast UART 16550 serial port 1x DB-25 ECP / EPP parallel port |
| Internal I/O | 6x SATAII onboard ports 1x Floppy port 4x Internal USB 2.0 headers 1x Fast UART 16550 serial header 1x IDE port |
| Management and Health Monitoring |
| Software | | • | Optional IPMI (Intelligent Platform Management Interface) 1.5 / 2.0 | | • | Super Doctor III | |
| Power Configurations | | • | ACPI Power Management | | • | Main Switch Override Mechanism | | • | Wake-On-Ring (WOR) header | | • | Wake-On-LAN (WOL) header | | • | Power-on mode for AC power recovery | | • | Internal / External modem ring-on | |
| CPU | | • | Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT | | • | Monitor for HyperTransport voltage 1.2V, DDR termination 1.25V | | • | CPU switching voltage regulator | |
| FAN | | • | Total up to five 3-pin fan headers | | • | 5 Fan Status Tachometer monitoring | | • | Status Monitor for Speed Control | |
| Temperature | | • | Monitoring for CPU and chassis environment | | • | CPU thermal trip support | | • | I^2C temperature sensing logic | |
| LED | | • | CPU / Overheat LED | | • | Suspend-state indicator LED | | • | +5V Standby Alert LED | |
| Other Features | | • | Chassis intrusion detection | | • | Chipkill Support | | • | Chassis intrusion header | |
| Expansion Slots |
| Supported Bus Interfaces | | • | 1x PCI Express x16 slot (nVidia SLI Technology Supported) | | • | 1x PCI Express x8 using x16 slot | | • | 1x PCI Express x4 using x8 slot | | • | 3x PCI 32-bit, 33MHz slots | | • | See options below for riser card configurations | |
| Expansion Slots | | 7x expansion slots (full height, full length) | |
| Storage and Media |
| Number of hard drives supported | 8x 3.5" Hot-swap SATA Drive Bays |
| Interface type supported | SATA (Depends on the RAID controller you select) |
| Storage Controllers | | • | Onboard nVidia MCP55 Pro SATA2 3.0Gbps Controller | | • | Add on SATA RAID Controllers available (Optional) | |
| Drive Bays | 1x Slim type bay for CD-ROM, CD-RW/DVD combo drive, or DVD±RW 2x 3.5" bays for floppy drive, card reader or CF adapter 1x 5.25" bay |
| RAID capabilities | Onboard Software RAID Controller:
SATA RAID 0, 1, 0+1, 5, JBOD Support
Add on SATA RAID Controllers available for additional RAID capabilities (Optional) |
| Chassis and Power Supply |
| Form Factor | Rack |
| Rack Height | 4U |
| System Cooling | | Front | | 3x 5000 RPM Hot-Swappable Cooling Fans | | Rear | | 2x 5000 RPM Hot-Swappable Exhaust Fans | |
| Chassis Dimensions | | Height | | 7" (177mm) | | Width | | 17.2" (437mm) | | Depth | | 25.5" (648mm) |
|
| Gross Weight | ≈ 58 lbs (depends on configuration) |
Power Supply
| | Non-redundant 800W AC power supply with PFC | | AC Voltage | | 100 - 240V, 60-50Hz, 10-4 Amp | | +5V Standby | | 4.0 Amp | | +12V | | 66.0Amp | | +5V | | 30.0 Amp | | +3.3V | | 24.0 Amp | | -12V | | 0.6 Amp | Power Supply Safety / EMC
USA - UL listed, FCC Canada - CUL listed Germany - TUV Certified Europe/CE Mark EN 60950/IEC 60950-Compliant |
| Environment |
| Operating Temperature | 10 - 35°C (50° to 95° F) |
| Non-Operating Temperature | -40 - +70°C (-40° to 158° F) |
| Humidity | 8 - 90% non-condensing |
| Non-Operating Humidity | 5 - 95% non-condensing |
