picoPSU-120 120w output, 12VC input DC-DC Miniature ATX Power Supply Orbit Micro

120w output, 12VC input DC-DC Miniature ATX Power Supply
Part Number: picoPSU-120 SKU Number: 2020

Price:
$53.13

Click any image to see a larger version.

Product Overview Specifications

Features:

120W
12VDC input
100% silent, fanless
Over 96% efficiency
Plugs directly into the ATX connector
Fits any motherboard equipped with a 20 or 24pin ATX connector.
ROHS compliant

Compact design, less cables. The picoPSU-120 is the smallest snap-in 12V ATX dc-dc power supply. The picoPSU is compatible with an entire range of mini-itx motherboards as well as regular boards. The picoPSU-120 provides a cool, silent 120 Watts of power for small PC designs using a single 12V power source.

Cool power. Operating at only 12V, the picoPSU-120 dc-dc ATX power supply delivers 120 Watts of power. picoPSU provides plenty of power (via ATX connector and HDD cable harness) for CPU and an entire range of peripherals.

100% Silent The picoPSU-120 mini PSU is a 100% silent fanless dc to dc solution. No fans, no noise, just power for small and silent PCs.

picoPSU-120 is a fully compliant DC-DC ATX PC PSU. It can power VIA mini-ITX boards with C3 or C7 processors, P3, P4, Pentium-M, Core Duo Mobile or Desktop versions and llow power AMD processors.

picoPSU-120 ATX DC-DC converter is very small, measuring just 31x45x20mm, about the size of two AA batteries, picoPSU-120 is also 1U ServerRack compliant.

CE / FCC / VCCI Certifications: EN55024, EN55022 Class B (CE certification), Australia / New Zealand (using CISPR 22, EN55022), Japan (VCCI: using CISPR 22, ANSI C63.4), United States (FCC Part 15, Subpart B, Class B), Canada (ICES-003 using CISPR 22, ANSI C63.4).

Main Specifications

Input Voltage

12V regulated, min=2A, max=10A (load dependent). Over-voltage shutdown will occur at ~13-13.5V

Output Wattage

120W

Power Ratings
(Max Load = 80 Watts)

Volts (V)	Max Load (A)	Peak Load (A)	Regulation %
5V	6A	8A	+/- 1.5%
5VSB	1.5A	2A	+/- 1.5%
3.3V	6A	8A	+/- 1.5%
-12V	0.05A	0.1A	+/- 5%
12V	7A	10A	Switched input
At max load, forced air ventilation is required. For fanless operation de-rate the output of the 3.3 and 5V rails by ~20%. Peak load should not exceed 60 seconds.

DC-Jack

Female, panel mount, 2.5 x 5.5 x 10 mm
Requires 5mm/2.5mm male barrel jack

Overload protection

Over load protection will be effected when either of the loads (+5V &
+3.3V) exceeds > 200% Max Load

Turn-on Delay

After turning on, at least 20 ms will be needed for the rise of +5VSB output voltage (measured from 10% to 95%) to reach its peak.

Remote ON/OFF control

Logic level is LOW - Output voltage is enabled (PS_ON pin)
Logic level is HIGH - Output voltage is disabled (PS_ON pin)

Operating environment

Temperature: -20 to 85 degree centigrade.
Relative Humidity: 10 to 90 percent, non-condensing.

Efficiency

95%

MTBF

100K hours at 55Â° Celsius

Size

44.5mm(L) x 20mm(W) x 30mm (H) (1U compliant)

Weight

57grams, including cable harness, 27 grams without cable harness

Certifications

EN55024, EN55022 Class B (CE certification), Australia/New Zealand (using CISPR 22, EN55022), Japan (VCCI: using CISPR 22, ANSI C63.4), United States (FCC Part 15, Subpart B, Class B), Canada (ICES-003 using CISPR 22, ANSI C63.4)