Features Quad Core / Dual Core Xeonl® processor SBC. Intel 5000P embedded chipset with longevity support. Robust mechanism design for enhanced product reliability. Dual high performance PCI Express Gigabit Ethernet controller Up to 8 GB ECC/Register FB-DIMM DDR 2 memory Dual PCI Express Gigabit Ethernet for high networking bandwidth. Four USB 2.0 directly output from bracket to save the cabling cost. Flexible design for single processor. Dedicated CPU cooler design for the thermal solution. Ordering Information PEAK 8920VL2 PICMG 1.3 Full-Size SHB Express (System Host Board), Intel® 5000P Chipset, LGA 771 socket support Dual-Core /Quad-Core Intel® Xeon® procressors w/ 4 DDR2 FB-DIMM / 2 Express GbE / 6 USB2.0 / VGA/ 2 SATA.

Main Specifications
CPU	- Support LGA771 Dual-Core Intel Xeon processor 5000 series and Quad-Core Intel Xeon Processor 5300 series (80W) - Intel Embedded Processor List ( Intel® Longevity CPU):   Dual Core Intel Xeon Processor (5130 & 5140)   Dual Core Intel® Xeon® Processor LV (5128, 5138, 5148)
System Chipset	Intel 5000P memory controller Hub Intel 6321ESB I/O controller Hub
System Bus	1066/1333 MHz FSB support
BIOS	- AMI Flash BIOS - Plug & Play support - Support Soft off, Wake on LAN, Power On by PS2 Keyboard Function Key, RTC alarm Power On - Power on after power failure - 8M-bit fl ash ROM
System Memory	- 4x 240-pin DDR2 FBDIMM memory, 533/667 MHz up to 8 GB - Support ECC / Register DDR2 memory up to 8GB
Ethernet	- 2 x Intel® 82573L PCI Express Gigabit Ethernet - Support Boot From LAN (PXE) - Support Wake On LAN (When 5Vsb power available) - 2 x RJ45 with LED
I/O	- USB 2.0: 4 ports through I/O bracket - USB 2.0: 2 ports, with 1x6 JST (2.5mm ) - Serial port: 2 ports, with 2x5 box-header (2.0mm) support RS-232 only - Parallel port: 1 port , with 2x13 box-header (2.0mm), Bi-directional, EPP/ECP - PS/2: 1 x Mini-Din Keyboard/Mouse - GPIO: Support 4 sets of general purpose I/O each with TTL level (5V) interface - FAN: 2 x 4-pin FAN JST connectors (for CPU coolers ) - 1x on board buzzer - 1x 2-pin power on switch - 1x 2-pin header for power LED / - 1x 2-pin header for reset - 1x 5-pin header for key lock - 1x 2-pin header for HDD LED - 1x SMBus 2.0 to Backplane
Display	- ATI RS1000 PCI graphic Controller - 32MB DDR2 SDRAM VGA Memory - 1 x DB15 VGA port
Storage	- SATA: 2 ports, support RAID 0,1 through Backplane - IDE: 1 x 40-pin IDE connector, support Ultra ATA 33/66/100 -1x 2-pin JST (2.5mm) power connector for DOM (Disk On Module)
System Monitor	- 8 voltage (For +3.3V, +5V, Vcore x2, 1.8V, 1.5V, 5Vsb, and Vbattery) - 3 temperature (For 2 CPU and system) - 3 FAN speed monitor ( 2 for CPU and 1 for ESB2)
On-board RTC	- On-chip RTC with battery back up - 1x External Li-Lon battery
Watchdog Timer	Watchdog Timer is programmable by software from 0 to 255 seconds (Tolerance 15% under room temperature 25°C)
Power Supply	Power source from backplane through PICMG 1.3 Golden Finger, support ATX mode
Power Consumption	- Full-Loading Mode 21.4A(+12V) 2.07A(+5V) 3.85A(+3.3V) 0.04A(+5Vsb) - Light-Loading Mode 10.59A(+12V) 1.69A(+5V) 3.63A(+3.3V) 0.04A(+5Vsb)
Temperature	Operating Temperature: 0°C ~ 60°C (for Board Level Only) Storage Temperature: -20°C to 85°C
Humidity	Operating: 10%~90% (non-condensing) Non-Operating: 5%~95% (non-condensing)
Dimension	PICMG 1.3 SHB: 338.58 mm (L) x 126.39 mm (W) (13.3" x 4.9")
Certifications	- CE approval - FCC Class A
Weight	GW: 1.2Kg