EEPRXB16 is a PCI Express /PCI EXPRESS/ PCI combo right angle riser. It can support up to three independent buses. It usually plugs into the slot 6 position of the motherboard.
The middle PE-X16 connector connects directly to the riser's gold finger. The top PE connector and the bottom PCI connector are connected to other PE and PCI buses on the M/B via two flexible cables. All connectors are mounted on the B side of the riser card. The bottom connector sits on a add-on PCB and use a low profile PCI connector.
This riser is designed for chassis with three horizontal cutouts that line up with the typical slot 6 position of the motherboard. The PE connectors on the riser can be configured to X1, X4, X8 or X16. The PCI connector can be 3.3V, 5V, 64 bit or 32 bit connector. The connector centers are 1.08", 1.88" and 2.68" height..
The overall dimension of the main board assembly is 2.91"H x 7.10"W.
All height dimensions are referenced to the bottom of the board. The cables can be ordered in various lengths, depending on the location of the PCI and PE slots on the motherboard.
