PAPTX-PCI is a PCI/AGP/PCI, 3-slot right angle riser card designed for a 2U rackmount chassis. The main riser board plugs directly into an PCI-32 or a PCI-64 slot.The overall dimension of the main board assembly is 2.95"H x 7.00"W.

The middle AGP connector connects to the AGP slot on the Motherboard via an AGP riser in the back. The top PCI connector connects to the bottom PCI connector. Some dedicated signals that are needed for the top connector, are borrowed from a small paddle board that is plugged into a nearby motherboard PCI slot. The bottom connector connects directly to the goldfinger.

The user can order the riser with PCI-32 bit or PCI 64 bit connectors. All connectors are mounted on the B side of the riser card. This riser is designed for chassis with horizontal cutouts that line up with the 1st PCI slot on the motherboard.

The top PCI connector is located at 2.521", the center AGP connector is located at 1.721", and the bottom PCI connector is located at 0.921" from the bottom of the riser. The narrow cable can be ordered in various lengths.

PAPTX-PCI is a PCI/AGP/PCI, 3-slot right angle riser card designed for a 2U rackmount chassis. The main riser board plugs directly into an PCI-32 or a PCI-64 slot.The overall dimension of the main board assembly is 2.95"H x 7.00"W.